Gelatin-Mold Wall Sconce
You’ll Need
- 1 small round jello mold
- 1 medium oblong jello mold
- drill and bit
- wire
- wire cutters
- needle nose pliers
- candle
Directions
- Mark the center points on the top and bottom rims of an oblong mold. Place a small round mold at the bottom of the oblong mold, and drill three holes through both molds, one at the center mark and one ¼" from each side of the center.
- Lace a 4" piece of wire through all holes and secure molds together by twisting tightly on the back side.
- Drill a small hole ¼" from each side of the top center mark. From the back, insert each end of a 4" piece of wire through the drilled holes and twist ends decoratively.
|
|
|
